Mapei Ultrabond Adhesive Single Cartridge 28 0z.
Requires heavy duty 13 inch caulking gun (won’t fit the regular 9 inch caulking gun)
A High-Viscosity, Urethane Adhesive for Turf Seams
DESCRIPTION
Ultrabond Turf PU 1K-HV is a high-viscosity, moisture-curing, one-component,
urethane adhesive specifically designed for bonding of synthetic turf in high performance
sports installations. Offering excellent weather resistance, Ultrabond
Turf PU 1K-HV can be used in interior and exterior applications. It meets FIFA
requirements for bond strength in sports-turf applications.
FEATURES AND BENEFITS
• Fast-setting
• Excellent handling characteristics and superior green strength
• Exceeds FIFA standards for bond strength
INDUSTRY STANDARDS AND APPROVALS
• Exceeds FIFA Joint Strength (EN 12228 and EN 13744)
LEED v4 Points Contribution LEED Points
Health Product Declaration (HPD)* Up to 2 points
* Using this product may help contribute to LEED certification of projects in the
category shown above. Points are awarded based on contributions of all project
materials.
Additional Green Certifications
• Living Building Challenge (LBC) Red List Free: This product has been
verified per the most current Red List on the LBC’s Website.
WHERE TO USE
• Interior and exterior synthetic turf installations
• Professional and educational synthetic sports field arenas
• Commercial and residential landscaping applications of synthetic turf
LIMITATIONS
• Install only in areas recommended by the turf manufacturer
• Use only when the surface temperature is between 41°F and 95°F (5°C
and 35°C), and when the ambient relative humidity is between 20% and
80%. When the ambient relative humidity is lower than 20%, longer cure
times can be expected.
• Do not use to install nonporous turf backings over nonporous surfaces.
SUITABLE SUBSTRATES
• Ultrabond Turf Tape or manufacturer-recommended seaming tape
• Exterior- and marine-grade plywood, as well as pressure-treated lumber
• Other approved wood underlayments (per manufacturer recommendations)
• Concrete
• Cement-based, exterior-rated patching and repair compounds
• Existing, cured asphalt pavement in good condition
SURFACE PREPARATION
• All surfaces must be prepared in accordance with the manufacturer of the
synthetic playing surface for the type of intended use and must comply
with current regulations or standards.
• All surfaces must be structurally sound, dry, solid, stable, even, flat and
smooth.
High-Viscosity, Urethane
Adhesive for Turf Seams
®
Turf PU
1K-HV
®
Ultrabond Version: Feb. 7, 2018
Surface should be clean and free of dust, dirt, oil, grease,
paint, curing agents, concrete sealers, loosely bonded
toppings, loose particles, old adhesive residues, and any
other substance or condition that may prevent or reduce
adhesion.
PRODUCT APPLICATION
Read all installation instructions thoroughly before installation.
1. Cut the knob of the Ultrabond Turf PU 1K-HV cartridge.
2. Screw the nozzle tip into the cartridge.
3. Cut the nozzle tip to the desired opening size.
4. Pull back the synthetic turf in the area of the repair.
5. Apply Ultrabond Turf PU 1K-HV in a zigzag pattern to cover
most of the repair area.
6. Immediately place the turf into the freshly applied adhesive
and place weight on the repair area to keep it secure during
curing.
Note: Use for small repairs only. A light misting of water
will speed up the curing time of Ultrabond Turf PU 1K-HV,
allowing quicker repairs. Weights may be required on turf
seams to ensure proper bonding and even thatch heights.
CLEANUP
• Clean any adhesive smudges from the turf surface with
a white cloth and mineral spirits while the adhesive is
still fresh/wet. Clean tools with mineral spirits while the
adhesive is still fresh/wet. Ultrabond Turf PU 1K-HV is
extremely difficult to remove when cured.
PROTECTION
• Protect the installation from light traffic for at least 12
hours. Protect it from heavy traffic for at least 24 hours.
• Protect the installation from rain/water exposure and
freezing conditions for 12 hours after installation
Ultrabond Turf PU 1K-HV is a high-viscosity, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K-HV can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.
Reviews
There are no reviews yet.